Building Panels Used in PEB.

Single Skin Panel Offering

Building Panels Used in PEB-Single skin Roof and wall Panels manufactured by PEB-Metal are rolled formed from either 0.5 mm (Nominal) thick AluZinc coated steel (AluZinc is an Aluminum / Zinc alloy) confirm to ASTM A 792 M Grade 345 classes having a minimum yield strength of 34.5 KN / CR 2 with Zinc / Aluminum coating confirming to AZ 150 (or optional) The coating is achieved by hot deep process of 55% aluminum and 45% zinc alloy. 0.7 mm (nominal) thick Aluzinc coated steel is optional available in both mill finish and in pre-painted finish (in four standard colors).

Interior linear panels, partition panels, fascia panels and soffit panels are made using the same profile in 0.5mm frost white AluZinc coated steel, 0.7mm pre-painted Aluzinc is an option that may be supplied, in any PEB – Metal Standard color, for large projects.

single_skin

Curved eaves are standard in roof monitors and optional in building eaves. There are two details for curved eaves. We recommend the curved eave with projection because it is considerably easier to erect. Fitting the ribs of the curved eave panels simultaneously with the ribs of both the roof and wall panels is a very difficult task where as fitting the ribs of the curved eave panels with the ribs of the roof panels only is considerably easier.

curve_eave
curved_eave_without

Leave a Replay

Your email address will not be published. Required fields are marked *

*
*